Description

Full CBD extraction line, Condition NEW
Including

Ethanol Cooling Unit
-Jacketed Cooling tank with stirrer
Model: ST-A800 Volume:800L I.D.:1000mm
Design pressure(MPA): 0.1-ATM
Jacketed pressure(MPA): ATM-0.3
Design tempreture: -80-200℃
Material: SS304
-Chiller
Model:DLSB-200/80
Volume:200L
Lowest temp: -80℃
Refrigerating capacity(W): 1176W-17640W
-Centrifugal pump
Model: LQF-3
Flow: 3T/H
Max Lifting:70m
Max.Suction:4.5m
Outlet pressure:0.7Mpa

Extraction Unit
-Centrifuge
Model:PP-45
1. Drum:
Diameter: 450mm
Height: 300mm
Working volume(Filter bag): 45L
Rotate speed: 1500 RPM
2. Power: 2.2KW
3. Liquid tank volume:85L
4. Jacket volume: 20L
5. Voltage: 220V/60HZ
6. With Jacketed and temperature measurement function,vacuum function
-Chiller
Model:DLSB-50/80
Volume:50L
Lowest temp: -80℃

Filter Unit
-Vacuum filter
Model:ZF-100L
Model: ZF-100L
Glass material: GG-17
Frame material: Stainless steel
Flask volume: 100L
Funnel size(mm):550*320
Funnel material: Stainless steel
Reaction opening: 3
Overall size(mm):580*5800*2000
Weight: 90kg
-Vacuum pump (Matched to filter)
Model: 2XZ-4
Suction rate: 4L/s
Speed: 1400rpm
Motor power: 0.55KW
Noise: 67dBA
Oil content: 1L

Solvent Recovery Unit
-Falling film evaporator + Steam boiler(200L/H)
1.Structure: A. tubular heater+vacuum evaporation
B. tubular condensor cooling system
C. equipped with two 72kw electric heating steam generators;
2. Equipment composition: A.heater 12m2
B. condenser 16m2
C. separator
D. feed pump
E. discharge pump
F. vacuum pump
G. balance cylinder
H. electric control box
I. bracket
J. internal connecting pipe fittings
3. material thickness: A. heater: δ = 3mm / SS304, tube: SS304
B. separator δ = 4mm / SS304
C.condenser δ = 3mm / SS304 tube:SS304;
4. work pressure: Heating steam: 0.3MPa; equipment ultimate vacuum: – 0.095 MPa;
5.delivery system: Feed pump 1.1kw; discharge pump 0.75kw; condensate pump 0.75kw; vacuum pump 2.2kw
-Industrial Chiller(LPM70F)
1.Compressor : Cooling power: 151.1KW Voltage:220V/60HZ,3phase
2. The refrigerant:R134A
3. Evaporator: Chilled water outlet temperature:7℃ Chilled water inlet temperature:12℃ Cool water flow: 6.2m³/H Size: DN50MM
4. Condenser: Inlet air temp: 35℃

Decarboxylation Unit
-Decarboxylation reactor
Model: DS-20
Glass material: GG-17
Frame material: SS304
Reactor volume: 20L
Jacketed volume:8L
Receiving volume: 5L
Temperature: -80-250℃
Vacuum degree:-0.098Mpa
Stirring speed: 0-450rpm
Stirring shaft diameter: 15mm
Sirring power: 90W1/3
-Circulating oil bath
Model: GY-20L
Main material: stainless steel
Volume: 28L
Oil pump power: 120W
Flow rate: 5-10L/min
Pump lift: 8-12m
Heating power: 3KW
Temp. range: 0-300℃
Temp. accuracy: ±1℃
Intelligent temp. control
With K type sensor and digital display
-Chiller
Model: DLSB-10/10
Volume: 10L
Lowest temp: -10℃
Refrigerating capacity(W): 1248- 319
Flow: 20L/min
Circulating pump power: 100W
-Vacuum pump
Model: SHZ-95B
Flow(L/min):80
Lift(m):12
Voltage:220v/60HZ
Power:370W
Single head pumping
capacity(L/min):10
Capacity(L):50
Vacuum: -0.098Mpa
Pumping head NO.: 5
Overall size:450*340*870
Material: Stainless steel

Distillation Unit
-Molecular distialltion (LMD-150)
Model:LMD-150
Evaporation Area: 0.25m2
Processing Rate:1.0-8 KG/H
Including the main molecuar
distiller, supporting heater and
chiller and vacuum pump system
5 options(The same with the picture)